Filter
Top Products
English
- 13
6 Check the date and time.
Refer to “Setting the Date and Time” to
change the date and time. (see page: 14)
Plug & Auto Setup
Your DVD-VCR will automatically set itself up
when it is plugged into the mains for the first time.
TV stations will be stored in memory. The
process takes a few minutes. Your DVD-VCR
will then be ready for use.
1 Connect the RF Cable as indicated on page
9. (Connecting Your DVD-VCR to the TV
using the RF Cable)
2 Plug the DVD-VCR into the mains.
• “AUTO” in the front panel display flickers.
3 The Language Set menu is displayed.
4 Press the or button to select the
desired language, then press OK button.
Start the auto setup.
5 Start the auto scanning.
The number of stations automatically stored
by the DVD-VCR depends on the number of
stations that it has found.
Auto Setup will be
started.
Check antenna and TV
cable connection.
RETURN MENU
Please Wait
10%
RETURN MENU
Auto Setup
• Now, you only have to switch the DVD-VCR
on and it is ready for use.
• Function for “Plug & Auto Set Up” is fixed
already. So if you want to change this fixed
one, you can change. (refer to “Presetting the
Stations Manually” page 16).
Notes
OK RETURN MENU
English
Français
Deutsch
Español
Italiano
Nederlands
Language Set
√
êÛÒÒÍËÈ
SETUP
VCR
PROG
FUNC
DVD
OK RETURN MENU
Clock Set
Time Date Year
12 : 00 01 / JAN / 2007 MON
6700_XSA_Eng1(01) 2/14/07 7:54 PM Page 13