Filter
Top Products
English
- 29
Searching for a Specific Sequence
Each time you record a cassette on this DVD-
VCR, an “index” is automatically marked on the
tape when recording starts. The Search function
allows you to fast-forward or rewind to a specific
index and start playback from that point.
Depending on the direction selected, the index-
es are numbered as follows:
• This DVD-VCR uses a standard indexing
system (VISS). As a result, it will recognize
any indexes marked by other VCRs using the
same system and vice versa.
Go To [0:00:00] Stop
Use this feature when you want to search for
the 0:00:00 counter position on a cassette.
Press the CLEAR button at the point on the
tape where you want to set the counter to
0:00:00. The VCR will rewind or fast forward,
searching for the 0:00:00 counter position, and
then automatically stop at that position.
1 Press the MENU button, then press the ➐ or
❷ button to select FUNC. The Function
menu is displayed. Press the OK or ❿ button.
2 Press the ➐ or ❷ button to select VCR
Function, then press the OK or ❿ button.
The VCR Function menu is displayed with
the Go To [0:00:00] selected.
• It can be displayed simply by pressing the
SEARCH button.
3 Press the OK or ❿ button again.
etc.
21 1 2
etc.
Prev
Seq.
Seq. being
played
Next
Seq.
➔
SETUP
DVD
VCR
PROG
FUNC
VCR Function
Go To [0:00:00]
End Search
Intro Scan
OK RETURN MENU
End Search
Use this feature when you want to search for
a blank position to record a program on a
cassette.
The VCR will fast forward, searching for a
blank position, and then automatically stop at
that position. If the VCR reaches the end of
the tape during end search, the tape will be
ejected.
1 Press the SEARCH button. The VCR
Function menu is displayed. Press the ➐
or ❷ button to select End Search.
2 Press the OK or ❿ button.
Intro Scan
1 Press the SEARCH button.
The VCR Function menu is displayed.
Press the ➐ or ❷ button to select Intro
Scan.
2 Press the OK or ❿ button.
3 Press the ➛➛ or ❿❿ button depending
on the direction where your desired pro-
gramme is located.
SETUP
DVD
VCR
PROG
FUNC
VCR Function
Go To [0:00:00]
End Search
Intro Scan
OK RETURN MENU
INTRO SCAN : ➛➛ ❿❿
SETUP
DVD
VCR
PROG
FUNC
VCR Function
Go To [0:00:00]
End Search
Intro Scan
OK RETURN MENU
6700_XSA_Eng2(01) 2/14/07 7:57 PM Page 29