Filter
Top Products
English
- 25
Using the Assemble Edit Function
This function allows you to start a new recording
at a specific position on the cassette while main-
taining a very smooth scene change.
1 Insert the cassette to be edited in your
DVD-VCR.
2 Press the ll button to start playback.
3 When you reach the position from which you
wish to start the new recording,
press the ll button.
4 Press the F.ADV/STEP button as often as
necessary to advance frame by frame, until
the exact recording position is located.
5 While the DVD-VCR is in still mode, hold
down the REC (●) button for a while to acti-
vate the assemble edit function. The mode is
changed to pause.
6 Select the source from which you wish to
record by pressing:
• The PROG or button for television
channels.
• The INPUT SEL. button for the LINE IN 1,
LINE IN 2 input source.
7 Press the ll button to start recording.
If you want to finish the recording, press the
■ button.
Using The Timer Programming
Feature
The Timer Programming feature allows you to
preset the DVD-VCR to record a programme up
to one month before that programme is to be
broadcast. Up to six programmes can be preset.
• Before presetting a recording, check that the
Date and Time are correct.
• You must check that the cassette tape is
loaded.
1Press the MENU button, then press the or
button to select PROG.
2 Press the OK or button. The timer pro-
gramming menu is displayed.
3 Press the OK or button to select PR, then
press the or button to select the required
station.
• Press the INPUT SEL. button to select an
input source (LINE IN 1, LINE IN 2) other
then the tuner.
4 Press the button to select Day, then press
the or button to select the required day.
MENU
RETURN
OK
SETUP
VCR
PROG
FUNC
DVD
Timer Method
If you want to set the
timer program, press
theOKkey.
::
::
::
::
::
::
PR Day Start Stop Speed
RETURN MENU
OK
01 MO 01
6700_XSA_Eng1(01) 2/14/07 7:54 PM Page 25