30 -
English
The tape counter:
• Indicates the elapsed time in the play and
record modes (Hours, Minutes and Seconds).
• Is reset when a cassette is inserted in the
DVD-VCR.
• Allows you to find the beginning of a sequence
easily.
• If the remaining time is to be calculated
correctly, you must indicate the type of
cassette being used.
1 Insert a cassette in your DVD-VCR.
To set the tape counter to zero at the begin-
ning of a sequence:
• Press the INFO button twice to display the
counter.
• Press the CLEAR button when you want to
set the tape counter to zero.
2 When you are ready,
• Start Playback or Recording.
• Press the ■ button.
• To fast-froward or rewind to the sequence at
which the counter was set to zero, press the
➛➛ or ❿❿ button.
• Some DVD-VCR information, such as the
counter, can be displayed on the television
screen (Unless you have deactivated the
Screen Messages mode; refer to page 22).
Press the INFO button:
• Once to display the current function,
programme number, recording speed, time
and counter.
• Twice to display the counter only.
• Three times to display the time remaining on
the cassette.
• Four times to clear the display.
Using the Tape Counter
0:00:00
Index Skip Search
This feature will enable you to fast
forward/rewind to a specific point on a tape: e.g.
If you have recorded 3 different programmes on
a tape and you have rewound the tape to the
beginning, by using this feature you can go
directly to the start of programme 2 simply by
pressing the SEARCH button.
1 Press the SEARCH button.
The VCR Function menu is displayed.
Press the ➐or❷☎button to select Intro Scan.
2 Press the OK or ❿ button.
3 Press the ➛➛ or ❿❿ button twice more.
4 These Index searches can be made forwards
(press the ❿❿ button) or backwards (press
the ➛➛ button).
(➛➛ -20
● ●
0
● ●
+20 ❿❿)
This will take you directly to the start of the
desired programme is located.
To cancel an Index search simply press the
❿ll or ■ button.
SETUP
DVD
VCR
PROG
FUNC
VCR Function
Go To [0:00:00]
End Search
Intro Scan
OK RETURN MENU
INDEX SEARCH : ➛➛ -06
4 When an Index mark is found the DVD-VCR
will playback the tape for 5 seconds, after
which it will continue searching for the next
Index mark
5 If you want to watch the tape from a
particular Index, press the ❿
ll button twice.
INTRO SCAN : ➛➛
6700_XSA_Eng2(01) 2/14/07 7:57 PM Page 30