Filter
Top Products
7
Switching the power on / off
1
Connect the power cable to the outlet.
Turn on the electricity, the power indicator lights in
orange (standby).
2
Press the power button.
The power indicator changes to green (running) and
initialization starts.
During initialization the message "INITIALIZING..." and
the firmware version are displayed on a "SANYO" logo
screen.
Once the initialization is complete, live videos are
displayed on multi-16 screen.
1
Press the power button.
The password entering screen is displayed.
2
Enter the ADMIN PASSWORD using the channel
selection buttons.
The factory default password is "1111".
For security reasons, make sure you change the default
ADMIN PASSWORD. (P38)
3
Press the ENTER button.
The SHUTDOWN confirmation screen is displayed.
4
Select "CONFIRM" with the control button (}~).
5
Press the ENTER button.
The power shuts down and the power indicator turns
orange.
212 53
4
•
A
Switching the power on
Do not press the power button during initialization. This
may result in data loss.
NO VIDEO
CH6
NO VIDEO
CH2
NO VIDEO
CH10
NO VIDEO
CH14
NO VIDEO
CH5
C
CH1
NO VIDEO
CH9
NO VIDEO
CH13
NO VIDEO
CH7
NO VIDEO
CH3
NO VIDEO
CH11
NO VIDEO
CH15
NO VIDEO
CH8
NO VIDEO
CH4
NO VIDEO
CH12
NO VIDEO
CH16
INTIALIZING...
Ver: SNXXXX.XX.XXXX(YYYYMMDD)
2009/05/03 09:04:54
2%
:A
B
Switching the power off
1 10
2009/05/03 09:04:54
2%
:A
~
CH1
PASSWORD
* * * *
- - - -
SHUTDOWN
CANCEL CONFIRM
L8HBT_WA(DSR-2116_2108)(GB).book 7 ページ ２００９年５月２７日 水曜日 午後４時５０分