Sanyo DSR-2116 DVR User Manual


 
55
Main screen basic operations
Allows you to select the display mode for live and playback
video.
b Single-screen display
Click the channel selection button on the operation panel or
select one screen and double-click.
The video of the specified camera is displayed in
single-screen.
Memo: Double-clicking on a single-screen display returns the
previous screen display.
b Quad-screen display
Click the quad-screen display button on the operation panel.
The video of the cameras connected to this unit is displayed
on quad-screen.
Memo: Each time the button is clicked the video of the next
four channels is displayed in order of the channel
numbers.
In DSR-2108, the unit of 4 screens, 1 to 4 and 5 to 8,
are displayed in sequence.
b Multi-screen display
Click the multi-screen display on the operation panel.
The video of the cameras connected to this unit is displayed
on multi-16 screen or multi-9 screen.
In DSR-2108, the only available multi-screen is multi-8
screen.
Memo: Each time the button is clicked the display switches in
turn from the multi-16 screen to the multi-9 screen (2
patterns) video.
Memo: <About selecting a camera video>
If a live video is selected (clicked) on the quad-screen
or multi-screen display, a red frame appears around
the live video to indicate that it is selected.
It is necessary to select a camera to perform the
following operation in quad-screen or multi-screen.
Saving images (P57)
PTZ dome camera operations (P58)
Switching the audio output (
5
Audio controller: P54)
A
Switching the display mode of the screen
0605
0807
0201
0403
1413
1615
1009
1211
12
16
03 04
13 14 15
07
08
09 10 11 12
0302
05
06
01
04
07 08 09
0302
05
06
01
04
07 08 09
1211
15
01 02
01 02
05 06
10
13
14
16
L8HBT_WA(DSR-2116_2108)(GB).book 55 ページ 2009年5月27日 水曜日 午後4時50分