Filter
Top Products
42
NETWORK settings
Press the MENU button and input the password.
The MAIN MENU is displayed, select "NETWORK" using the
control button ({|}~).
When connecting this unit to a multiple unit network, set an
individual port number.
1
Select "PORT" using the control button ({|) and
press the ENTER button.
The "PORT" screen is displayed. The initial value is
5445.
2
Select a value using the control button ({|), and
select a port number by repeating the operation
using the control button (}~).
3
Press the EXIT/STOP button once operations are
complete.
To give permission to operate from an external PC.
Select "CLIENT ACCESS" using the control button ({|),
and set "ON" using the control button (}~).
ON: Accessing the unit via a PC using the supplied
exclusive software
OFF: Does not allow access
Set if the network bandwidth is not large enough when
monitoring live videos.
Select "BANDWIDTH SAVING" using the control button
({|), and set the settings using the control button
(}~).
ON: Live videos advance frame by frame (At the rate of
1 frame per second)
OFF: Does not limit the network bandwidth
MAIN MENU
RECORDLIVE
NETWORK HDD SET SERVICE
SYSTEM
NETWORK
PORT 5445
CLIENT ACCESS ON
BANDWIDTH SAVING ON
NETWORK TYPE LAN
IP 0.0.0.0
SUBNET MASK 0.0.0.0
GATEWAY 0.0.0.0
DNS 0.0.0.0
DDNS OFF
SEND E-MAIL OFF
NTP SET OFF
A
Setting the PORT
B
Setting a CLIENT ACCESS
C
Setting the BANDWIDTH SAVING
PORT
5 4 4 5
- - - - -
L8HBT_WA(DSR-2116_2108)(GB).book 42 ページ ２００９年５月２７日 水曜日 午後４時５０分