Sanyo DSR-3709 DVR User Manual


 
English 107
6 POWER LOSS/USED TIME
Use the following procedure to check the date and time of
power losses, the amount of hard disk operation time, and
the amount of power-on time.
1 Press the [MENU] button and turn the
select “5. POWER LOSS/USED TIME”,
and then turn the shuttle dial clockwise.
The <POWER LOSS/USED TIME> screen is displayed.
Check the date and time of power losses and the amount
of hard disk operation time.
(1) LOSS/RECOVER
Display information in sequence for the four most
recent power losses (i.e., the date and time of loss
and recovery).
The number on the left is the number of power losses
(Example: #011). For all numbers above 999, the
number “999” is displayed.
(2) DISK1 USE
Displays the total amount of running time for disk 1.
(3) DISK2 USE
Displays the total amount of running time for disk 2.
When only one hard disk is installed, “------” is
displayed.
(4) POWER
Displays the amount of power-on time for the digital
video recorder.
2 Press the [EXIT/OSD] button.
The display returns to the normal screen.
<MAIN MENU>
1.INITIAL SET ->
2.RECORD SET ->
3.GENERAL SET ->
4.SCREEN SET ->
5.POWER LOSS/USED TIME ->
6.INITIALIZATION LOG ->
7.COPY MENU SETTINGS ->
MOVE:JOG SELECT:SHUTTLE
Main Menu
CARDCARD
MENU
RESET
EJECT
Jog dial
[MENU] button
Shuttle dial
[EXIT/OSD]
b
u
tt
on
<POWER LOSS/USED TIME>
POWER LOSS RECOVER
#011 01-14 19:15 01-15 09:55
01-13 21:13 01-14 09:21
01-03 18:48 01-05 08:56
01-01 09:49 01-03 10:32
USED TIME DISK1 USE : 00096H
DISK2 USE : -----H
POWER : 00096H
F/W: M 0.30-00 / S 0.20-04 / C 0.09-00
MENU
(3)
(1)
(2)
(4)
EXIT/OSD
e00_l8hbg_us_7.book Page 107 Thursday, November 25, 2004 1:44 PM