Filter
Top Products
GENERAL SET4
92 English
SETTINGS
z If an administrator password was entered, the security
lock is cancelled and the indicator is turned off.
z If a user password was entered, the security lock is
partially cancelled and the indicator remains lit.
This section describes how to initialize and expand the
hard disk.
When a single hard disk is installed, the hard disk capacity
is displayed for DISK 1; when two hard disks are installed,
the capacity is displayed for “DISK 1” and “DISK 2”.
1 Press the [MENU] button and turn the
jog dial to select “3. GENERAL SET”,
and then turn the shuttle dial clockwise.
The <GENERAL SET> screen is displayed.
2 Turn the jog dial to select “4. HDD SET”,
and then turn the shuttle dial clockwise.
The <HDD SET> screen is displayed.
The cursor moves to “DISK INITIALIZE”.
3 Turn the shuttle dial clockwise.
<WARNING> screen is displayed. “NO” flashes.
4 Turn the jog dial to select “YES”.
5 Turn the shuttle dial clockwise.
The “HDD INITIALIZING!” screen is displayed, and the
hard disk is initialized.
When initialization has been completed, the display
returns to the <HDD SET> screen.
6 Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to
the normal screen.
z Initialization of hard disk erases all contents.
Setting and initializing the hard disk
Initializing the hard disk
MENU
<HDD SET>
DISK1 : 82GB
DISK2 : ---GB
DISK INITIALIZE ->
CAUTION : ALL RECORDING WILL BE ERASED!
MIRRORING : OFF
PLAYBACK DRIVE : ***
CAUTION : RECORDING SPEED WILL BE
LIMITED BY MIRRORING!
<WARNING>
THIS CHANGE WILL INITIALIZE THE DISK.
ALL RECORDING WILL BE ERASED.
ARE YOU SURE ?
NO
CHANGE:JOG SET:SHUTTLE
HDD INITIALIZING !
EXIT/OSD
e00_l8hbg_us_7.book Page 92 Thursday, November 25, 2004 1:44 PM