Filter
Top Products
24 English
SETTINGS
MENU CONFIGURATION AND OPERATIONS
This section describes the menu configuration, and which
menu item to select for each operation.
1 Press the [MENU] button.
The <MAIN MENU> screen appears.
2 Press the [ ] or [ ] button to select
the desired menu.
When you move the cursor, the selected item is displayed
in reverse.
3 Press the [ ] button.
The selected sub-menu appears.
The cursor is positioned on the first setting item.
4 Press the [EXIT/OSD] button.
The display returns to the normal screen.
z While recording, you can display menu screens but
cannot change menu settings.
In the sub-menu screen, use the [ ] [ ] [ ] [ ]
buttons to enter the desired setting.
(1) To move the cursor up/down
Press the [ ] or [ ] button.
(2) To move the cursor right or to a setting item
Press the [ ] or [ ] button.
(3) To change a setting value
Press the [ ] or [ ] button.
Follow the steps below to restore just the currently
displayed menu items to their initial values.
1 Display the desired sub-menu screen.
2 Press the [MENU RESET] button.
The displayed settings are restored to their initial values.
Displaying the menu screen and sub-
menu screens
[] button[MENU] button [ ] button
[ ] button [EXIT/OSD] button
To exit a menu screen
Entering settings in sub-menu screens
To restore menu setting items to their
initial values
(1)
(2)
(3)
[MENU RESET] button
e00_l8hae_xe_7.book Page 24 Monday, July 5, 2004 10:02 AM