Sanyo DSR-M DVR User Manual


 
English 39
6 RS-485/NETWORK SET
This section describes how to make the RS-485 terminal
connections/settings needed to connect to an external
device, and how to make the network connections needed
to connect to a PC.
You can make digital video recorder menu settings and
monitor images from a PC via a network. To do so, connect
an LAN cable to the LAN terminal on the digital video
recorder’s rear panel.
z To connect a PC directly
(Do not use a switch.)
z To connect to an intranet
(Use a switch.)
z Network connection via the Internet is not available.
z You cannot use a router.
When either the VA-SW81LITE or VA-SW814 remote
operation software is used, the IP address will be set
automatically by the PC. The following section describes
the method to be used when it is necessary to set an IP
address using the digital video recorder.
1 Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU>
screen appears.
2 Select “6.RS-485/NETWORK/REMOTE
SET” and press the [ ] button.
The <RS-485/NETWORK/REMOTE SET> screen
appears.
Network connections and settings
AUDIO
ALL
RESET
LAN
VIDEO
MIC IN
IN
OUT
IN
OUT
TV SYSTEM
NTSC
PAL
A
IN
10
IN
CCTV Camera
Cross-cable
PC
AUDIO
ALL
RESET
LAN
VIDEO
MIC IN
IN
OUT
IN
OUT
TV SYSTEM
NTSC
PAL
A
IN
DVR
DVR
DVR
AUDIO
ALL
RESET
LAN
VIDEO
MIC IN
IN
OUT
IN
OUT
TV SYSTEM
NTSC
PAL
A
IN
DVR
DVR
DVR
CCTV Camera
Straight-cable
PC
PC
SWITCH
Settings for PC or network connection
Item Setting Description
(1)
IP
ADDRESS
Displays the IP address that has been set.
(2)
ADVANCED
SETTING
Set whether to set IP address on digital video
recorder or on PC.
(1)
(2)
e00_l8hae_xe_7.book Page 39 Monday, July 5, 2004 10:02 AM