Sanyo DSR-M DVR User Manual


 
5 SECURITY LOCK SET
38 English
SETTINGS
1 Press the [ ] and [ ] buttons to move
the cursor to “REC CONTROL”.
2 Press the [ ] button.
3 Press the [ ] and [ ] buttons to select
“ADMIN” or “USER”.
The setting is now finished.
4 Press the [EXIT/OSD] button.
The display returns to the normal screen.
1 Press the [ ] button for about 3
seconds after setting the password
while the normal monitoring screen is
displayed.
A confirmation tone sounds, the LOCK/REMOTE indicator
lights, and the security lock is set.
2 To check the security lock, press the
[MENU] button.
The password entry screen appears for about 5 seconds.
When idle for approximately 5 seconds, the display returns
to the normal screen.
3 Enter the password while the password
entry screen is displayed.
Enter the password using the [ ], [ ] and [ ]
buttons.
z Enter the password set for administrators or users
(such as “123456AB”).
4 Press the [ ] button.
The LOCK/REMOTE indicator goes out, and the display
returns to the normal screen.
Setting the authorization for
recording and playback operations
[ ] button[MENU] button [ ] button
[ ] button [EXIT/OSD] button
Setting the security lock
[ ] button [ ] button
[ ] button
LOCK/REMOTE indicator
[EXIT/OSD] button
[MENU] button
e00_l8hae_xe_7.book Page 38 Monday, July 5, 2004 10:02 AM