Filter
Top Products
5 SECURITY LOCK SET
English 37
3 Press the [ ] button.
The first password entry bar “-” flashes.
4 Press the [ ] and [ ] buttons to select
the character to enter.
Example:
Selecting “1”
5 Press the [ ] button.
The second password entry bar flashes.
6 Use the same procedure to enter the
remaining digits (“23456AB” in this
example).
z To set a 4-digit password
When you have entered four digits, and the fifth
password entry bar is flashing, press the [ ] button.
7 When you have entered the password,
press the [ ] button.
The cursor moves to “OFF” (flashing).
8 Press the [ ] and [ ] buttons to select
“ON”.
z If you select “OFF” for the “ADMIN” setting, you can’t
set the “USER” password.
9 When you have finished making the
setting, press the [ ] button.
The cursor moves to “USER”.
If you don’t want to set a user
password, the password
setting is now finished.
Press the [ ] button to
move the cursor to “REC CONTROL”, to set the
authorization for recording and playback operation. (
J
P.38)
Example: Setting “AB123456”
1 Press the [ ] and [ ] buttons to move
the cursor to “USER”.
2 Press the [ ] button.
The first password entry bar “-” flashes.
(Example: A)
Press the [ ] and [ ] buttons to select “A”.
3 Press the [ ] button.
The second password entry bar flashes.
Press the [ ] and [ ] buttons to select “B”.
Use the same procedure used to set the password to enter
the remaining digits.
4 When you have finished making the
setting, press the [ ] button.
The cursor moves to “OFF” (flashing).
5 Press the [ ] and [ ] buttons to select
“ON”, then press the [ ] button.
The cursor moves to “REC CONTROL”.
Setting the user password
e00_l8hae_xe_7.book Page 37 Monday, July 5, 2004 10:02 AM