Filter
Top Products
CHANGING THE ON-SCREEN DISPLAY
Selecting the On-screen Display
You can select to display or not the date and time.
1 Turn the power on to all devices used.
2 Press the MENU button until the (SET UP 2) menu is
displayed.
3 Press the ] button, until the desired item for which
the display function will be set is flashing.
4 Press the l (or j) button to set “Y” for the functions
described below.
DATE . . . . . . . . . . . . The date is displayed
TIME . . . . . . . . . . . . The time is displayed
5 Press the PAUSE/SEARCH button, the normal
screen is displayed.
°
The setting procedure is now completed.
NOTE:
•
If the ON SCREEN switch is set to the “ON” position,
the items for which “Y” is set are recorded. The items
for which “N” was set at step 4 above are not recorded.
Changing the Date/Time Display Position
1 Turn the power on to all devices used.
2 Set the ON SCREEN switch to the “ON” position.
°
The date and time are displayed.
3 Press the « (or ]) button.
°
The display will move towards the right (or the
bottom).
NOTES:
•
If the « (or ]) button is kept pressed for 1 second or
more the display will move at a faster speed.
•
The display position cannot be changed while recording.
<SET UP 2>
¤DISPLAY
DATE Y
TIME Y
ALARM COUNT Y
¤TAPE IN MODE STOP
¤TAPE END MODE REW
¤TAPE END OUT -3M
¤SERIES REC N
¤EJECT MODE EJECT 1
¤THREAD CHECK Y
Date/Time display
10-15-99 FRI
15:20:00
NU4Q/U (SRC-800 GB) Fri. Aug., 06/1999
10