Filter
Top Products
TROUBLESHOOTING GUIDE
If the unit does not operate normally when you follow the instructions indicated in the manual, please refer to the table
below.
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
No power The power cord is not connected Connect the power cord
No image displayed on
the monitor TV
The connections are not correct Check that all connections are correct
The power to the camera and/or monitor TV
is not turned on
Turn all connected devices power on
The buttons do not
respond
A cassette tape is not loaded Load a cassette
All functions are suspended due to
condensation
Wait for the “À” indicator to go off
The security lock is engaged Cancel the security lock
Recording is not
possible (the tape is
ejected)
The loaded cassette has no
erasure-prevention tab
Load a cassette tape with
erasure-prevention tab or cover the tab hole
with adhesive tape
Noise in the playback
picture
The video heads need cleaning Clean the video heads
The date and time are
not recorded
The ON SCREEN switch is set to the “OFF”
position
Set the ON SCREEN switch to the “ON”
position
The cassette tape
cannot be ejected
Problem with the system Unplug the power cord then plug it back in
System Down
If the unit does not function at all, try the following.
1 Unplug the power cord then plug it back in.
2 Reset the memory. (Press the ALL RESET button.
Under normal conditions, do not touch the ALL
RESET button.)
3 If the problem is not corrected after performing steps
1 and 2 a few times, consult your dealer.
NU4Q/U (SRC-800 GB) Fri. Aug., 06/1999
22