Filter
Top Products
NORMAL RECORDING
Normal Recording
1 Turn the power on to all devices used.
2 Load a cassette tape with erasure-prevention tab.
NOTE:
•
If in the (SET UP 2) menu, TAPE IN MODE is set
to “REC”, recording will start.
3 Set the ON SCREEN switch to the “ON” position.
4 Press the REC button.
°
The Record indicator
(a)
lights.
°
Recording starts.
5 To stop recording, press the STOP button.
NOTES:
•
A tape recorded on this VCR cannot be played back
completely on other SP mode only VCRs.
•
If you press on the REC button and the loaded cassette
has no erasure-prevention tab, the VCR will eject the
cassette.
•
During recording, the MENU button will not function
(the menu cannot be displayed).
[Recording Speed]
Recording
speed
Maximum recording
duration (with an T-160
cassette tape)
Recording
interval
Audio
recording
Tape motion
8
Standard
mode
8 hours 1/60 second Possible Continuous
TAPE COUNTER NOTES:
•
There is no tape counter indication for the blank
portions of the tape.
•
The tape counter indicates real hours, minutes and
seconds.
•
There may be a slight discrepancy between the position
shown on the tape counter and the actual tape position.
•
When rewinding the tape past the “0:00:00” position, a
minus (–) sign will be displayed.
Record Pause
Recording can be interrupted temporarily.
1 Press the PAUSE/SEARCH button during recording.
°
The Pause/Still indicator
( h )
blinks.
NOTES:
•
The image appears on-screen but it is not recorded.
•
If a recording pause continues for 5 minutes or
more, the VCR will go into stop mode to avoid
damaging the tape.
2 To resume recording, press the REC button, or press
the PAUSE/SEARCH button again.
NU4Q/U (SRC-800 GB) Fri. Aug., 06/1999
12