Filter
Top Products
SETTING THE SECURITY LOCK
The security lock function is designed to prevent
accidental stopping of recording if the STOP button is
pressed inadvertenly.
1 While holding the TRACKING/V.STILL + button,
press the l button.
°
“ö”
is displayed on the digital display.
To cancel the security lock, while holding the
TRACKING/V.STILL + button, press the l button, “ö”
will be erased from the digital display.
NOTES:
•
While the security lock is engaged all commands,
except the one to cancel the security lock, are disabled.
•
The security lock cannot be engaged while a menu is
displayed.
CLOCK ADJUSTMENT
When using 2 or more VCRs of this same model, the
clock on the second VCR and on, can be synchronized
with the clock on the first VCR, using the CLOCK
ADJUSTMENT function.
1 Connect the CLOCK SET OUT terminal on VCR 1 to
the CLOCK SET IN terminal on VCR 2.
2 Repeat the procedure for all the other VCRs,
connecting the CLOCK SET OUT terminal on VCR 2
to the CLOCK SET IN terminal on VCR 3, and so on.
3 Press the MENU button until the (SET UP 2) menu is
displayed.
4 Press the ] button, until the “EXT TIME ADJ.” (time
of the adjustment) setting is flashing.
5 Press the l (or j) button to set the hour at which the
adjustment will be conducted.
NOTES:
•
Be sure to set the same time on all the VCRs.
•
The clock adjustment cannot be set to “00 : 00”.
6 Press the PAUSE/SEARCH button, the normal
screen is displayed.
°
The setting procedure on the first VCR is now
completed.
7 Repeat the procedure for all the other VCRs, setting
“EXT TIME ADJ.” (to the same time as set on the first
VCR).
NOTE:
•
Connect the COM terminal on all VCRs used.
Example
<SET UP 2>
¤DISPLAY
DATE Y
TIME Y
¤EXT TIME ADJ. 03:00
¤TAPE IN MODE STOP
¤TAPE END MODE REW
¤TAPE END OUT -3M
¤SERIES REC N
¤EJECT MODE EJECT 1
NU4Q/U (SRC-800 GB) Fri. Aug., 06/1999
18