Filter
Top Products
SERIES RECORDING
Continous Loop Recording Setup
It is possible to configure at least two this VCR for
continous loop recording.
Under loop recording when the recording finishes on the
first unit, the new recording will start on the second unit.
When the recording finishes on the second unit, recording
will start on the first unit.
1 The SERIES OUT terminal of VCR No.2 and the
SERIES IN terminal No.1 should be connected (See
diagram).
2 Set the following items as indicated.
Item VCR No.1 VCR No.2
and on
Cassette tape Loaded Loaded
Operation mode Stop Stop
“TAPE END MODE” (in
(SET UP 2) menu)
REW REW
“SERIES REC” (in (SET
UP 2) menu)
Y (YES) Y (YES)
Security lock Canceled Set
3 Press the REC button on VCR No.1.
°
Recording will start in series recording mode.
4 Set the security lock on VCR No.1.
NOTES:
•
The “TAPE END MODE” in (SET UP 2) menu should
be set to "REW" for both units without fail.
•
The TAPE END indicator will continue to bink when the
end of the first tape is rearched.
•
Under loop conditions, the tape will continue to
re-record. If you need to keep the recorded infomation,
please remove the tape after recording is complete and
insert and new tape.
Loop recording connection
VCR No.2
Video camera
To
VIDEO IN
jack
To
VIDEO OUT
jack
VCR No.1
To
VIDEO IN
jack
To
VIDEO OUT
jack
To
SERIES IN
terminal
To COM
terminal
To
SERIES OUT
terminal
To COM
terminal
To
SERIES IN
terminal
To VIDEO IN jack
Monitor TV
To
SERIES OUT
terminal
NU4Q/U (SRC-800 GB) Fri. Aug., 06/1999
15