Filter
Top Products
NORMAL RECORDING
Setting the Mode at the End of the Tape
In the (SET UP 2) menu, you can set the mode of the
VCR mode when the tape reaches the end during
recording.
1 Press the MENU button until the (SET UP 2) menu is
displayed.
2 Press the ] button, until the “TAPE END MODE”
setting is flashing.
3 Press the l (or j) button, to set the desired mode.
REW . . . . . . . . . . . . Rewinds the tape to the
beginning, then goes to stop
mode
STOP . . . . . . . . . . . . Goes to stop mode
4 Press the PAUSE/SEARCH button to save the
setting.
TAPE END Indicator Setting
1 Press the MENU button until the (SET UP 2) menu is
displayed.
2 Press the ] button, until the “TAPE END OUT”
setting is flashing.
3 Press the l (or j) button, to select the desired output
mode.
–3M . . . . . . . . . . . . . The TAPE END indicator
flashes when the tape
counter reaches “7:57:00”
and/or when the tape
reaches the end.
END . . . . . . . . . . . . . The TAPE END indicator
flashes when the tape
reaches the end.
4 Press the PAUSE/SEARCH button, the normal
screen is displayed.
NOTES:
•
If “TAPE END MODE” has been set to “REW”, the
TAPE END indicator will flash while the tape is
rewinding.
•
Press the EJECT, FF, REW or PLAY button to turn
the indicator off.
<SET UP 2>
¤DISPLAY
DATE Y
TIME Y
ALARM COUNT Y
¤TAPE IN MODE STOP
¤TAPE END MODE REW
¤TAPE END OUT -3M
¤SERIES REC N
¤EJECT MODE EJECT 1
¤THREAD CHECK Y
<SET UP 2>
¤DISPLAY
DATE Y
TIME Y
ALARM COUNT Y
¤TAPE IN MODE STOP
¤TAPE END MODE REW
¤TAPE END OUT -3M
¤SERIES REC N
¤EJECT MODE EJECT 1
¤THREAD CHECK Y
NU4Q/U (SRC-800 GB) Fri. Aug., 06/1999
13