Sanyo SRC-850 VCR User Manual


 
ALARM RECORDING
Alarm Search
To go to the beginning of a desired alarm recording.
1 Press the PAUSE/SEARCH button during stop mode.
°
“AL SEARCH 01” will be displayed on screen.
2 Press the l (or j) button to set the desired alarm
number (1 to 99), then press the FF (or REW) button.
°
The desired alarm is searched and a still image
of the beginning of the alarm recording will
appear on-screen.
NOTE:
The alarm number is relative to the actual tape
position. (Please refer to the illustration below.)
3 Press the PLAY button.
°
Playback will start.
Alarm Scan
To look for an alarm recording by viewing the first 5
seconds of each alarm recording.
1 Press the PAUSE/SEARCH button twice during stop
mode.
°
“AL SCAN” will be displayed on screen.
2 Press the FF (or REW) button.
°
The unit will advance (or rewind) the tape at high
speed and playback the first 5 seconds of every
alarm recording.
°
To cancel the alarm scan mode, press the
STOP
button.
3 While the desired recording is being played back,
press the PLAY button.
°
Playback will start, alarm scan mode is cancelled.
Playback
112
Rewind direction
Fast-forward direction
Actual position
Alarm number 2
Alarm trigger input point
NU4Q/U3 (SRC-850 GB) Mon. Aug., 23/1999
English
17