Sanyo SRC-850 VCR User Manual


 
SETTING THE SECURITY LOCK
The security lock function is designed to prevent
accidental stopping of recording if the STOP button is
pressed inadvertenly.
1 While holding the TRACKING/V.STILL + button,
press the l button.
°
ö
is displayed on the digital display.
To cancel the security lock, while holding the
TRACKING/V.STILL + button, press the l button, “ö
will be erased from the digital display.
NOTES:
While the security lock is engaged all commands,
except the one to cancel the security lock, are disabled.
The security lock cannot be engaged while a menu is
displayed.
SETTING THE BUZZER
During alarm recording, if the tape reaches the end, if
buttons are pressed, or if there is a VCR mechanical
failure, the tape will stop or be ejected and a buzzer can
be sounded.
1 Press the MENU button until the (SET UP 3) menu is
displayed.
@@@@@@@<SET@UP@3>
öBUZZER
@@@ALARM@IN@@@@@@Y
@@@TAPE@END@@@@@@Y
@@@KEY@IN@@@@@@@@N
@@@WARNING@@@@@@@Y
öSW@OUT
@@@OUTPUT@@@@@@@@Y
@@@TIMING@@@@@@@@FIELD
@@@FIELD@@@@@@@@@01
2 Press the ] button, until the desired item for which
the buzzer function will be set is flashing.
3 Press the l (or j) button, to set “Y” for the functions
described below.
ALARM IN . . . The buzzer will be heard during
alarm recording.
TAPE END. . . The buzzer will be heard when
the end of the tape is reached
during recording. To stop the
buzzer, press the STOP, EJECT,
PLAY, FF or REW button.
KEY IN . . . . . . The buzzer will be heard when
one of the VCR buttons is
pressed.
WARNING . . . The buzzer will be heard if the
tape stops or is ejected due to a
problem with the internal
mechanism.
The buzzer may also be heard
depending on the settings for
THREAD CHECK and OUTPUT
in the (SETUP 2) menu, and
VIDEO LOSS in the (SETUP 4)
menu.
To stop the buzzer, press the
STOP button.
4 Press the PAUSE/SEARCH button to save the
settings.
NOTES:
If “N” is set, the buzzer will not be heard.
During timer recording mode, security lock engaged
mode and alarm recording mode, the buzzer will not be
heard when a button related to one of these modes is
pressed, even if “Y” is set for the “KEY IN” item.
NU4Q/U3 (SRC-850 GB) Mon. Aug., 23/1999
22
English