Filter
Top Products
NORMAL PLAYBACK
Normal Playback
1 Turn on the power to the VCR and TV monitor.
2 Load the video cassette tape.
3 Press the PLAY button.
°
Playback starts.
°
If necessary, adjust the tracking to eliminate the
noise from the picture.
4 To stop playback, press the STOP button.
°
To advance or rewind the tape, press the
FF
or
REW
button.
NOTES:
•
If a tape recorded in SP mode on a standard VCR is
loaded, playback will be done in 2-hour mode.
•
A tape recorded on other VCRs produced by another
manufacturer may not be played back with the same
degree of clarity on this unit.
Tracking Control
If there is noise in the image during playback,
1 While looking at the playback picture, press and hold
the TRACKING/V. STILL + button to minimize the
noise.
2 If it cannot be minimized, press the TRACKING/V.
STILL – button.
Vertical Lock Control
During still image mode,
1 Press and hold the TRACKING/V. STILL + button to
reduce the vertical rolling of the image.
2 If it cannot be corrected, press the TRACKING/V.
STILL – button.
NU4Q/U3 (SRC-850 GB) Mon. Aug., 23/1999
20
English