Filter
Top Products
86 Fibre Channel Interface Manual, Rev. D
The RLS Accept includes the LS Command Code and the LESB. The LESB counts are not cleared by a reset.
There is no protocol for clearing the counts. The requester must compare the current values with those read
previously.
Field definitions (listed alphabetically)
Invalid CRC Count
Number of frames discarded due to CRC errors while the drive is in an “open” state. Reference the specific drive product
manual to determine if this field is supported.
Table 46: RLS Accept Payload
Bit
Byte
76543210
000000010
100000000
200000000
300000000
LS Command Code
4 (MSB)
Link Failure Count
5
6
7 (LSB)
8 (MSB)
Loss of Synchronization Count
9
10
11 (LSB)
12 (MSB)
Loss of Signal Count
13
14
15 (LSB)
16 (MSB)
Primitive Sequence Protocol Error
17
18
19 (LSB)
20 (MSB)
Invalid Transmission Word
21
22
23 (LSB)
24 (MSB)
Invalid CRC Count
25
26
27 (LSB)
Table
number
46