Filter
Top Products
Fibre Channel Interface Manual, Rev. D 93
Field definitions (listed alphabetically)
Hard Address of Responder
This is the 24 bit NL_Port Identifier. The lower 8 bits are the AL_PA the drive attempts to acquire in the LIHA sequence dur-
ing loop initialization. This field represents the address indicated on the drive interface connector. If the drive does not have
a hard address, this 24 bit field is zeros. If the drive has a hard address and is able to acquire it during the loop initialization
process, the Hard Address and N_Port ID fields of the ADISC Accept will be the same.
LS Command Code (Link Services Command Code)
02h ADISC Accept Payload.
Node Name of Responder
This is the unique 8 byte identifier for the drive sending the ADISC Accept. Refer to Table 23 for the format of the Node
Name.
N_Port ID of Responder
This is the 24 bit NL_Port Identifier used in the S_ID of the ADISC Accept header. The lower 8 bits are the AL_PA the drive
acquired during loop initialization.
Port Name of Responder
This is the unique 8 byte identifier for the drive port sending the ADISC Accept. Refer to Table 23 for the format of the Port
Name.
Table 50: ADISC Accept Payload
Bit
Byte
76543210
000000010
100000000
200000000
300000000
LS Command Code
4
Reserved
5 (MSB)
Hard Address of Responder6
7 (LSB)
8 (MSB)
Port Name of Responder:
15 (LSB)
16 (MSB)
Node Name of Responder:
23 (LSB)
24
Reserved
25 (MSB)
N_Port ID of Responder26
27 (LSB)
Table
number
50
50
50
50
50