Filter
Top Products
Fibre Channel Interface Manual, Rev. D 245
Perf (Performance)
0 Informational exception operations that are the cause of delays are acceptable.
1 The target does not cause delays while doing informational exception operations. A Perf bit set to one may cause
the target to disable some or all of the informational exceptions operations, thereby limiting the reporting of informa-
tional exception conditions.
Report Count
Indicates the number of times to report an informational exception condition to the application client. Maintaining of the
Report Count field’s access power cycle and/or reset by the target is vendor specific.
0 Indicates there is no limit on the number of times the target reports an informational exception condition.
Test
This field specifies whether the drive will create false drive failure notifications.
0 The drive does not create false drive failure notifications.
1 The drive creates false drive failures at the next interval time, provided that the DExcpt bit is not set. The MRIE and
Report Count fields apply as specified in this document. A false drive failure will be reported as sense code/qualifier
5DFF (FF for false failure versus a true failure 5D00).
158
158
158