Sharp GB201 DVR User Manual


 
7
HR-GB201
04/5/18
HR-GB201_UK.fm
HR-GB201 9JCG5230100042
Power Source
-Charging the main unit-
Charging the main unit
1
Connect the AC adaptor to the DC IN 5V socket on
the cradle.
2
Plug the AC adaptor into the wall socket.
3
Place the main unit on the cradle.
! Press down the unit firmly.
! Battery charge indicator (red) lights up.
" About charging time
The battery fully charges in approx. 4 hours, and the
battery charge indicator goes out.
Notes:
! Charge the battery within the range of 5°C - 35°C
(41°F - 95°F).
! The unit and the cradle may get warm during or after
charge. This is normal.
! When charging battery for the first time or after a long
period of disuse, battery life may be shorter. Repeat
charge/discharge cycle 4 to 5 times to restore the full
capacity.
" Built-in battery
! The built-in battery may discharge completely when
this product is left unused for long periods. Recharge
the battery before use.
! Charging time depends on the battery condition and
ambient temperature.
! At low temperatures, continuous playing time is short-
ened.
! Sharp shall not be liable for any damages resulting
from loss or alteration of data caused by malfunction,
repairs, or complete discharge of the battery.
Rear
PCDSC INLINE OUT
AC 100 - 240 V,
50/60 Hz
To the wall socket
Press down the unit
with its front side
facing toward you.
Battery charge
indicator (red)
Fit to the
connection
terminal of
main unit