Sharp LC-15B5M Flat Panel Television User Manual


 
10
Press MAIN POWER. The POWER indicator instantantly
changes from blinking red to green and the LCD TV set is
turned on.
NOTE
The On-screen display disappears after a few seconds.
To turn off the main power, press MAIN POWER.
Standby
To turn off the LCD TV
Press POWER. The POWER indicator will turn red.
To turn the LCD TV back on
Press POWER again. The POWER indicator will turn green.
Turning On and Off the Main Power
POWER indicator
1
PAL
B/G
On-screen display
MAIN POWER
Basic Operation
Switching TV/VIDEO AV1/AV2/COMPONENT/CARD/TV Mode
Turn on the power of the connected video equipment.
Press TV/VIDEO to select the applicable input source.
The screen changes in order of AV1, AV2,
COMPONENT, CARD and TV mode each time TV/VIDEO
is pressed.
NOTE
AV input mode indication remains for 5 seconds.
AV1: Video equipment connected to the AV1 input
terminals. The S-video input terminal is additionally
provided for the AV1 input. If both S-video terminal
and normal video terminals are connected with
cables, the S-video input terminal takes priority.
AV2: AV2 mode is used to adjust the preset settings and
IN or OUT can be selected. AV2 indication is not
displayed when OUT is selected. (For details on
setting AV-OUT, see page 19.)
COMPONENT:
Video equipment connected to the COMPONENT
input terminals.
CARD: Select this when running a memory card. (STILL
INDEX will be displayed when still picture mode and
VIDEO INDEX will be displayed when motion picture
mode.)
2
1
AV1
PAL
AV2
PAL
COMPONENT
VIDEO INDEX
12
PAL
B/G
AV1 mode
AV2 mode
COMPONENT mode
CARD mode
TV mode
LC-15_20B5M_E_P10-11.p65 04.1.30, 11:24 AM10