Sharp LC-15B5M Flat Panel Television User Manual


 
22
To let you enjoy NICAM broadcasting, this LCD TV receives
NICAM stereo system, bilingual, and monaural broadcasts.
Stereo
The LCD TV set is receiving a stereo broadcast.
Each time you press MPX, the mode changes between
“NICAM STEREO” and “MONO”.
•When “MONO” is selected, the TV sound is output monaurally.
49
NICAM
STEREO
49
MONO
Bilingual
The LCD TV set is receiving a bilingual broadcast.
Pressing MPX changes the audio mode in the order shown on
the right.
M1=main sound, M2=sub sound, or MONO=monaural sound,
can be selected.
49
NICAM
M1
49
NICAM
M2
49
MONO
Monaural
The LCD TV set is receiving a monaural broadcast.
Each time you press MPX, the mode changes between
“NICAM MONO” and “MONO”.
49
NICAM
MONO
49
MONO
NOTE
If approximately 3 seconds pass without a button being pressed,
the mode setting is automatically terminated and the LCD TV set
returns to the normal mode.
The setting can be individually selected for each channel number.
If the sound quality is poor due to a weak signal or other
problems during NICAM broadcast reception, set the “Off”
position of the NICAM to change the TV sound to monaural.
Press MENU to display the MENU screen.
Press \/| to select “Setup”.
Press ' /" to select “CH setup”, and press OK.
Menu
[
Setup CH setup
]
CH setup
Clock setup
Display mode
AV2 In/Out
Language
Demo
Setup
Press '/" to select “Nicam”, and press \/| to select
“Off”.
When the NICAM sound is set to the “Off” position, the
TV sound is output in monaural.
Press MENU to exit.
(When off position is selected)
15
NICAM
NOTE
When the NICAM sound is set to the “Off” position, MPX cannot
be used to change the audio mode (stereo and bilingual settings).
2
3
1
4
5
(When stereo sound is received)
(When main sound is selected)
(When sub sound is selected)
(When monaural sound is selected)
(When monaural sound is received)
NICAM Broadcast Selection
LC-15_20B5M_E_P18-23.p65 04.2.4, 4:44 PM22