Filter
Top Products
23
To let you enjoy A2 stereo broadcasting, this TV receives A2
stereo system and bilingual broadcasts.
Stereo
The LCD TV set is receiving a stereo broadcast.
• Each time you press MPX, the mode changes between
“STEREO” and “MONO”.
•When “MONO” is selected, the TV sound is output monaurally.
49
STEREO
49
MONO
Bilingual
The LCD TV set is receiving a bilingual broadcast.
• Pressing MPX changes the audio mode in the order shown on
the right.
•
MAIN=main sound or SUB=sub sound, can be selected.
49
MAIN
49
SUB
NOTE
• If approximately 3 seconds pass without a button being pressed,
the mode setting is automatically terminated and the LCD TV set
returns to normal mode setting.
• The setting can be selected individually for each channel number.
If the sound quality is poor due to a weak signal or other
problems during A2 stereo broadcast reception, set the “Off”
position of the A2 to change the TV sound to monaural.
Press MENU to display the MENU screen.
Press \/| to select “Setup”.
Press '/" to select “CH setup”, and press OK.
Menu
[
Setup CH setup
]
CH setup
Clock setup
Display mode
AV2 In/Out
Language
Demo
Setup
Press '/" to select “A2”, and press \/| to select
“Off”.
When the A2 sound is set to the “Off” position, the TV
sound is output in monaural.
(When off position is selected)
15
Press MENU to exit.
NOTE
• When the A2 sound is set to the “Off” position, MPX cannot be
used to change the audio mode (stereo and bilingual settings).
2
3
1
4
b is displayed if A2 is
received when A2 is set to
“Off”.
5
(When stereo sound is received)
(When main sound is received)
(When sub sound is received)
A2 Stereo Broadcast Selection
LC-15_20B5M_E_P18-23.p65 04.2.4, 4:44 PM23