Sharp LC-15B5M Flat Panel Television User Manual


 
28
Loading a PC Card Adapter
You need to set a memory card in a PC card adapter before
loading it. (See page 27.)
Check the Card Eject button is pressed.
Insert a PC card adapter into the PC card slot on the
LCD TV set slowly.
* Insert a card straight
into the slot.
The Card Lamp turns green.
Changing from Card Mode to the TV mode
Press either Channel Select, TV/VIDEO or CH( )/( ).
1
2
3
Inserting/Removing a PC Card
Important:
Do not allow foreign objects to enter the PC card slot. This could lead
to defects.
Confirm the Card Eject button is in the depressed
position.
The Card Eject button
Press the Card Eject button.
Insert the PC card adapter.
The Card Eject button
PC card adapter
The Card Lamp lights up green.
Press the Card Eject button, and remove the PC card
adapter.
When pressed, the card eject button pops up.
The PC card adapter is ejected when the button is
pressed again.
The Card Eject button
Confirm the Card Lamp has turned green.
NOTE
If the Card Eject button is not in the depressed position, the card
cannot operate. Please use with the Card Eject button in the
depressed position.
When ejecting the PC card adapter, confirm the Card Lamp is
green before ejecting the adapter.
Never eject the PC card adapter when the Card Lamp is red.
When there are many files, reading can take about 5 minutes.
1
2
Loading a PC Card Adapter
3
LC-15_20B5M_E_P24-28.p65 04.2.4, 11:58 AM28