Filter
Top Products
55
CLEARING THE SECRET NUMBER
If you forget the secret number, clear the secret number using the following procedure.
1
Select an item from the list below to display the secret number input screen. (For operating the on-
screen display menu, see page 20.)
• "Color system" (
➝
"Terminal Setting"
➝
System Options menu).
• "EZ Setup" or "Reset" (
➝
Initial Setup menu).
• "CH Setup” (
➝
"Broadcasting Setup"
➝
Initial Setup menu).
• "Parental CTRL" (
➝
"Individual Setup"
➝
Initial Setup menu).
• "Interactive Service" (
➝
"Internet Setup"
➝
Initial Setup menu).
• "Software Update" (
➝
Information menu).
2
Press and hold both CH
U
and VOL
k
on the TV simultaneously until the message appears on the
screen.
The secret number is
.
NOTE
• As a precautionary measure, make a note of your secret number above, and keep it in a safe place.
Troubleshooting - Error Message
The example of an error
message displayed on a
screen
Error
code
Possible Solution
• Failed to receive
broadcast.
E202 • Check the antenna cable. Check that the antenna is correctly setup.
• No broadcast now. E203 • Check the broadcast time in the program guide.
• An incompatible
audio signal has been
received. Check the
output device settings.
— • This message is displayed when an audio format other than PCM, DTS or
Dolby Digital is input.
- Set the audio output format of connected external HDMI equipment to
PCM, DTS or Dolby Digital.
- Refer to the operation manual of the external equipment for setting
details.
Information on the Software License for This Product
Software License
You can read the software licenses in the on-screen display menu. Refer to "Information" > "Software
License".
■
Software composition
The software included in this product is comprised of various software components whose individual
copyrights are held by SHARP or by third parties.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear
slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight
or near a heater, as this may cause the cabinet to deform and the front panel to malfunction.
Storage temperature:
f
4°F to
e
140°F (
f
20°C to
e
60°C)
Appendix