Sharp LC-60LE650U Flat Panel Television User Manual


 
7
• In the installation procedure, be careful not to catch your fi ngers between the
TV set and the fl oor.
Do not remove the stand from the TV unless using an optional wall
mount bracket to mount it.
After attaching the stand to the TV, do not hold the stand when you
put up, set up, move or lay down the TV.
QUICK INSTALLATION TIPS
1
Attach your antenna to the back of the television.
(See page 8.)
2
Connect the AC plug for the television into the
AC outlet.
• Place the TV close to the AC outlet, and keep the
power plug within reach.
LC-80LE857U/LC-80LE757U/LC-80LE657U/
LC-80LE650U/LC-80C6500U
AC outlet
LC-70LE657U/LC-70LE650U/LC-70C6500U
2
1
1
AC outlet
LC-60LE657U/LC-60LE650U/LC-60C6500U
2
1
1
AC outlet
Bundle the cords properly with the cable tie.
• When bundling the cords, use the AC cord holder
mounted on the TV. Relocate from
A
to
B
.
LC-70LE857U/LC-60LE857U
A
B
2
1
1
2
1
1
Remove and loosen
Attach and bundle together
LC-70LE757U/LC-60LE757U/
LC-70LE755U/LC-60LE755U/
LC-70C7500U/LC-60C7500U
A
B
2
1
1
2
1
1
Remove and loosen
Attach and bundle together
NOTE
TO PREVENT RISK OF ELECTRIC SHOCK, DO
NOT TOUCH UN-INSULATED PARTS OF ANY
CABLES WITH THE AC CORD CONNECTED.
3
When turning on the TV for the fi rst time, press
POWER on the television.
POWER
4
Insert the batteries into the remote control unit.
(See page 8.)
NOTE
• Speakers cannot be detached from the TV.
• The TV angle cannot be adjusted.
Experiencing HD Images
An HDTV without an HD source is just an ordinary TV.
To enjoy HD images on the TV, you should get
HD programming from the following:
• Over-the-air broadcasting via HD quality antenna
• HD cable/satellite subscription
• HD compatible external equipment
NOTE
• For information on updating to HD programming, ask
your cable/satellite service provider.
QUICK REFERENCE
LC-70LE657U/LC-60LE657U/LC-70LE650U/
LC-60LE650U/LC-70C6500U/LC-60C6500U
1
Confirm that there are 12 screws (8 long screws
and 4 short screws) supplied with the stand unit.
2
1
Set the post for the stand unit onto the
polystyrene foam.
2
Attach the base to the post.
3
Insert and tighten the 8 screws into the 8
holes on the bottom of the base.
• Hold the stand unit securely with one hand,
and then tighten the screws.
LC-70LE657U/LC-70LE650U/LC-70C6500U
Long screws
FRONT
2
1
1
3
LC-60LE657U/LC-60LE650U/LC-60C6500U
Long screws
2
1
1
3
FRONT
3
1
Insert the stand into the openings on the
bottom of the TV.
• Make sure that the stand is fi rmly inserted into
the TV. Improper installation may result in tilting
of the TV set.
2
Insert and tighten the 4 screws into the 4
holes on the rear of the TV.
1
2
2
1
Short screws
Soft cushion