Filter
Top Products
25
Shutter Effect
(for the LE857U, LE757U, LE755U and C7500U models)
Available only when AV MODE is set to "VINTAGE
MOVIE" MODE. This function makes the images look
like they are fl ickering in the same way as old-time
fi lms or TV were.
Lamp Swing Effect
(for the LE857U, LE757U, LE755U and C7500U models)
Available only when AV MODE is set to "VINTAGE
MOVIE" MODE. When this function is enabled, the
lamp light looks like it is swinging. You can adjust the
effect level between 0 and +3.
Quad Pixel Plus 2
(for the LE857U and LE757U models)
Smoothes diagonal lines by detailed dot control.
Advanced: Produces smoother diagonal lines by
jaggy removal process.
Standard: Produces smooth diagonal lines.
Off: No adjustment.
NOTE
• When AV MODE is set to "VINTAGE MOVIE" MODE,
"Quad Pixel Plus2" is not available.
Active Contrast
Automatically adjusts the image contrast according
to the scene.
Advanced: Produces higher contrast image
especially in dark scene.
Standard: Produces high contrast image.
Off: No adjustment.
Gamma Adjustment
Adjusts the differences of picture tones between
bright parts and dark parts. The adjustment range
of the gamma can be set to a maximum of +2 and a
minimum of –2 by pressing
c
or
d
.
Black Level
Adjusts on-screen black level to your preferred level.
High: The black level gets brighter.
Low: The black level gets darker.
NOTE
• "Black Level" is available for input signal from
Composite Video, Component 480i and analog
broadcasts (air and cable).
Film Mode (3:2 pull-down)
This function provides high-quality playback of
images originally encoded at 24 frames/second,
such as fi lms.
Advanced: Adjusts effect to reduce judder from fi lm
contents. You can select a desired level of judder
reduction from 0 to +10.
Standard: Plays back images with equal display
time for each frame, reproducing movie theater
experience.
Off: Normal viewing mode.
NOTE
• "Film Mode" does not function depending on input
signal type.
• "Film Mode" does not function when you set AV MODE
to "VINTAGE MOVIE" MODE, "GAME" or "PC".
• "Standard" does not function depending on input
signal type.
Digital Noise Reduction
Produces a clearer video image.
Auto: Automatically adjusts the level of noise
reduction.
High/Middle/Low: You can select a desired level
for viewing a clearer video image.
Off: No adjustment.
NOTE
• "Digital Noise Reduction" is not available when you set
AV MODE to "PC" or PC format is being input.
• When AV MODE is set to "GAME", "AUTO" is not
available.
Monochrome
For viewing a video in monochrome.
Range of OPC
The brightness level range of the OPC sensor's
automatic adj
ustments can be set according to your
preferences.
The adjustment range of the OPC sensor can be set
to a maximum of +16 and a minimum of –16.
Max.: –15 through +16
Min.: –16 through +15
NOTE
• The "Range of OPC" settings are active only when
"OPC" is set to "On".
• The maximum setting cannot be set to a smaller
number than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Audio Settings
You can adjust the sound quality to your preference
with the following settings.
NOTE
• For operating the on-screen display menu, see page 22.
Selected item
c
button
d
button
Treble
For weaker
treble
For stronger
treble
Bass
For weaker
bass
For stronger
bass
Balance
Decrease audio
from the right
speaker
Decrease audio
from the left
speaker
NOTE
• The Audio menu is grayed out when "Output Select" is
set to "Variable". (See page 27.)
• For resetting Audio adjustment items to the factory
preset values, press
a
/
b
to select "Reset", press
ENTER, press
a
/
b
to select "Yes", and then press
ENTER.
Auto Volume
Different sound sources sometimes do not have
the same loudness level, such as a program and its
commercial breaks. The Automatic Volume Control
(Auto
Volume) reduces this problem by equalizing
levels.
High: Reduces the loudness gaps among different
sound sources strongly.
Middle:
Low: Reduces the loudness gaps among different
sound sources slightly.
NOTE
• The Audio Settings menu is grayed out when "Output
Select" is set to "Variable". (See page 27.)
3D Surround (for the LE857U, LE757U,
LE755U, LE657U and LE655U models)
The surround function produces Surround effect
from the speakers.
3D Stadium: Reproduces lifelike experience of
excitements such that live sports or concert
performances in a stadium create.
3D Hall: Reproduces concert hall experience with
realistic live surround sound using measured
reverberant sound in the concert hall.
3D Movie: Reproduces movie theater experience
with realistic live surround sound using measured
reverberant sound in the movie theater.
3D Standard: Creates 3 dimensional surround
sound with detailed control of the signal phase.
Normal: Provides mild surround sound.
Off: Outputs the normal sound.
NOTE
• The Audio Settings menu is grayed out when "Output
Select" is set to "Variable". (See page 27.)
• For some discs, setup may be required on your BD/
DVD player. In this case, please refer to the operation
manual of your BD/DVD player.
Surround
(for the LE650U, C7500U and C6500U models)
The surround function produces Surround effect
from the speakers.
NOTE
• The Audio Settings menu is grayed out when "Output
Select" is set to "Variable". (See page 27.)
• For some discs, setup may be required on your BD/
DVD player. In this case, please refer to the operation
manual of your BD/DVD player.
Bass Enhancer
This function allows you to enjoy bass-enhanced
sound.
NOTE
• The Audio Settings menu is grayed out when "Output
Select" is set to "Variable". (See page 27.)
Clear Voice
This function emphasizes speech against
background noise for greater clarity.
NOTE
• The Audio Settings menu is grayed out when "Output
Select" is set to "Variable". (See page 27.)
On-Screen Display Menu