Filter
Top Products
E-13
Setup & Connections
Connecting the Projector to Video Equipment
You can connect your projector to a VCR, laser disc player, DVD player, DTV decoder and other audiovisual
equipment.
CAUTION
• Always turn off the projector while connecting to video equipment, in order to protect both the projector and the equipment
being connected.
2. Connecting the Projector Continued
Connecting a VCR, laser disc player and other audiovisual
equipment
The S-VIDEO INPUT terminal uses a video signal system in which the
picture is separated into a color and a luminance signal to realize a higher-
quality image.
• If your video equipment does not have an S-video output terminal, use the conventional
video output terminal.
Connecting a DVD player, DTV decoder and other component
video equipment
S-video cable (sold separately)
Video cable (sold separately)
Audio cable (sold separately)
To S-video output terminal
To audio output terminals
To video output terminal
VCR
or
Laser disc player
To audio output terminal
(Slide the 15 pin/BNC switch on the rear terminals to the BNC position.)
When connecting this projector to a DVD player or a DTV decoder, select
“Component” for “Signal Type” on the GUI menu. (See page 40.)
To analog component
output terminals
DTV decoder
or
DVD player
Component cable (sold separately)
Three BNC-RCA adaptors
QPLGJ0107GEZZ
Audio cable (sold separately)