Filter
Top Products
E44
Handy features (for TV/AV mode)
Pausing the screen (FREEZE)
This feature pauses the image from the TV or other
connected AV equipment. This is handy when you
want to write down a recipe or the address for a
prize contest.
POWER
Virtual
PC TV
SLEEP
ENTER
MENU
BRIGHT
FREEZE
VIEW MODE
MULTI
BRIGHT
MODE
AV HDMI/DVI
1.Press the FREEZE button.
The images will pause.
Canceling pausing
1.Press the FREEZE button again.
Notes:
- You cannot pause the image displayed in the
PIP/SPLIT window.
- Changing channels or switching the display
mode (input) automatically cancels pausing.
- The screen size cannot be changed using the
VIEW MODE button while an image is paused.
The SCREEN ADJUST menu also cannot be
adjusted while an image is paused.
Switching power off after a specified
length of time (SLEEP)
The TV can automatically switch off (standby) after
a specified length of time. This is handy if you want
to use the TV at bedtime.
POWER
PC TV
FREEZE
VIEW MODE
SLEEP
ENTER
MENU
BRIGHT
MODE
BRIGHT
DISPLAY
CC MTS MUTE
Virtual
MULTI
AV
HDMI/DVI
1.Press the SLEEP button.
2.Specify in how many minutes you want the TV to
switch off by pressing the SLEEP button.
The time changes in the following order each
time you press the button:
30 min 60 min 90 min 120 min
150 min --- min 30 min
When the specified time elapses, the TV
automatically switches off and clears the SLEEP
timer.
Checking the time remaining on the SLEEP timer
1.Press the DISPLAY button.
The time remaining on the SLEEP timer will be
displayed for about 5 seconds. You can also
check the time remaining by pressing the SLEEP
button once.
Changing the specified time
1.Press the SLEEP button.
The remaining time will be displayed.
2.Change the specified time by pressing the
SLEEP button several times as needed.
Notes:
- When there are only 5 minutes remaining on the
SLEEP timer, the remaining time will be
displayed every minute.
- Pressing the POWER button while the SLEEP
timer is operating will clear the timer.
- Switching to PC mode automatically clears the
SLEEP timer.
- You can also set the SLEEP timer from the
MODE SELECT menu. (See pages E45 and E48
for information on using the menus.)
LD-26SH1U_gb_02.P65 2005/01/21, 11:2144