Filter
Top Products
E48
MODE SELECT menu (See page E45 for information on using the menus.)
Item
SLEEP TIMER
LANGUAGE
QUICK SHOOT
AV-OUT(AUDIO)
DVI SELECT
RESET
Description
Specifies how many minutes until the TV switches off (standby).
You can also set this item directly using the remote control, instead of the
adjustment screen. (See page E44.)
Selects the language (English, Spanish, or French) on the screen.
(See page E35.)
Reduces the visual lag inherent in fast-motion scenes.
Selects how to adjust the sound via the audio output terminals.
-
DVI AUDIO-IN
....
Enables these terminals to act as the audio input
terminals for DVI mode.
- FIXED
.............
Set "FIXED" when connecting to a VCR for recording, etc.
The volume via the audio output terminals is fixed.
(TV speaker volume can be adjusted.)
Image and sound are simultaneously output via the
output terminals. (Image and sound are output via the
output terminals a little earlier than when image is
displayed on the TV and sound is output from the TV
speakers.)
- VARIABLE1
....
Set to enjoy the sound from both the TV speakers and
external speakers while watching the image on the TV.
The volume can be adjusted. (See page E34.)
Image is displayed on the TV at the same time as when
sound is output via the output terminals. (Sound is
output via the output terminals a little later than when
image is output via the output terminal.)
- VARIABLE2
....
Set to enjoy only the sound from the external speakers
while watching the image on the TV.
The volume can be adjusted. (See page E34.)
However, no sound can be heard from the TV speakers
with this setting. (Sound via the headphone terminal
can be output.)
Image is displayed on the TV at the same time as when
sound is output via the output terminals. (Sound is
output via the output terminals a little later than when
image is output via the output terminal.)
Set depending on equipment connected to the DVI input terminal.
-AV
...................
AV equipment
-PC
..................
Computer
Be sure to turn off/on the power to the connected equipment after you
change the setting.
Resets adjustment values for this menu to their original factory settings.
Using the menus in TV/AV mode
LD-26SH1U_gb_02.P65 2005/01/21, 11:2148