Filter
Top Products
E67
EnglishDeutschFrançaisItalianoEspañolEnglish
Problem
The TV picture is doubled.
There are color bands.
The TV picture is distorted.
There is no video picture.
There is no game picture.
The TV picture does not move.
The video picture does not move.
There is no sound from the TV speakers.
There is no sound from the audio
output terminals.
Control buttons do not work.
The adjustment screen does not appear.
Control buttons do not work.
The remote control does not work.
There is no picture.
What to Check
- Is the antenna facing the right direction?
There may be reflected electric waves from nearby mountains
or buildings. Try changing the antenna's height and direction.
- Is there interference from a nearby TV?
Changing the antenna's height and direction may help.
- Try switching power off, waiting several seconds, and then
turning power back on.
- Are the cables properly connected? (Pages E19 through E24)
- Have you switched to the display mode appropriate for the
connected equipment? (Page E32)
- Did you set "BRIGHT MODE" to "OFF"? (Page E64)
- Have you turned on the connected equipment?
- Is the screen pausing? Did you press the FREEZE button?
(Page E44)
- Are the audio cables properly connected? (Pages E19 to E24
and E26)
- Did you press the MUTE button? (Page E64)
- No sound can be heard from the TV speakers while
headphones are connected.
- When "AV-OUT(AUDIO)" is set to "VARIABLE2" in the MODE
SELECT(2) menu, no sound can be heard from the TV
speakers.
(Pages E48 and E57)
- To input sound from the DVI equipment, set "AV-OUT(AUDIO)"
to "DVI AUDIO-IN" using the MODE SELECT(2) menu.
(Pages
E48 and E57)
- Adjust the volume. (Page E34)
- No sound can be heard from the TV speakers while the TV is in
power-saving mode.
-
When "STATUS" in the V-CHIP BLOCK menu is "ON",
TV/AV-IN SOUND is not available in PC mode. (Pages E42 and E51)
- Set "AV-OUT(AUDIO)" to "FIXED", "VARIABLE1", or
"VARIABLE2" using the MODE SELECT(2) menu. (Pages E48
and E57)
- When headphones are connected, sound can be output from
these terminals only when "FIXED" is selected. (Page E12)
- Is the adjustment lock set? (Page E64)
Some kind of load noises from outside might interfere with
normal operation.
- Turn off the power and turn it on after waiting at least 5 seconds,
and then check the operation.
- If the problem cannot be solved, disconnect and reconnect the
power plug from/to the AC outlet and check the operation.
TV care
LD-26SH1U_gb_02.P65 2005/01/21, 11:2167