Filter
Top Products
14
BASIC PLAYBACK
Preparations
• Turn on the TV and select the video input source connected to the unit.
• When you want to enjoy the sound of disc from the audio system, turn on the audio system and select the input
source connected to the unit.
• Set the TV screen type correctly to match your TV.
1
Before operation, enter the standby
mode.
ENGLISH
• The STANDBY indicator lights up. This means that
the unit is connected to the AC mains and a small
amount of current is retained to support operational
readiness.
• To turn the power completely off, press the POWER
switch again.
• Each time the POWER button on the remote control
is pressed, the unit is turned on to enter the
operating mode or off to enter the standby mode.
• In the standby mode, if the OPEN/CLOSE button on
the front panel is pressed, the unit can be also
turned on.
2
In the standby mode, turn the power on.
• 8 cm (3 inch) discs can be loaded on the inside
circle of the tray, too.
• When a DVD that doesn’t contain any menu is
loaded, playback automatically starts.
3
Open the disc tray to load a disc with the
printed side up, then close it.
• Example • Example
of DVD Video of MP3 disc
4
In case of CD, press the PLAY( ) button
to start play.
Note :
• When you play a DVD Video that contains a menu
or a MP3 disc, the menu display may appear on the
TV screen. In this case, see “To start playback from
the menu of DVD Video” or “To start playback from
the menu of MP3 disc” on the next page.
TITLE MENU
Dogs Cats
Cows Horses
Main unit
RC
Main unit
RC
or
Main unit
RC
or
PLAY MODE : NORMAL
SINGLE ELAPSED : --:--:--
SELECT : DECISION : ENTER BUTTON
DISC INFORMATION
ROOT ROOT
HAPPY CHRIS
FOREVER LOV
LOVE SONG
COOL JAZZ
PIANO
Folder and song menuRoot menu