Filter
Top Products
32
SETTING THE VIDEO SETUP
1
Tilt the CURSOR/ENTER button upward or downward to select the preferred item, then press the
CURSOR/ENTER button.
• Then the selected item screen is displayed.
When selecting the TV ASPECT
• When you connect a normal TV with 4:3 aspect ratio to the unit, select either “4:3 LETTER BOX” or “4:3 PAN-SCAN”
and when you connect a wide TV with 16:9 aspect ratio, select “16:9 WIDE”.
Note:
• Depending on some DVD Videos, the playback picture may not conform to
the TV aspect setting you select.
When selecting the TV TYPE
• Depending on the countries, this unit conforms to either the NTSC color system for U.S.A, Canada, etc., or the PAL
for Europe, Australia, China, etc.
If the color system of this unit is different from that of your TV monitor and the discs to be played, the screen may
be somewhat hard to see or the picture quality may be poor.
Only in this case, change the video signal format to another.
(For details about the video signal format of your TV monitor or the discs, refer to the operating instruction of your
TV or disc’s jacket.)
• You can select the desired video signal format with pressing the NTSC/PAL button, too.
(For details, refer to “CHANGING THE VIDEO SIGNAL FORMAT” on page 26.)
RC RC
ENGLISH