Filter
Top Products
22
• Then the program mode is displayed on the TV
screen.
• When the PROGRAM button is pressed again, the
program mode is canceled.
• Play will start in the programmed order.
• After all programmed tracks have been played, it
enters the stop mode without clearing the
programmed tracks.(Program play is suspended)
• Each time this button is pressed, the programmed
tracks are cleared one by one in the opposite order.
• Once program play is performed, you cannot clear
one by one.
• Then the programmed tracks are all cleared.
• Opening the disc tray clears all programmed tracks.
• Each time this button is pressed, the programmed
tracks are displayed one by one.
ENGLISHENGLISH
Clearing the programmed tracks
To clear one by one
• During programming,
press the CLEAR button.
To clear all programmed tracks
• During programming, press the
PROGRAM button and when the
STOP(
) button is pressed to stop
program play, press and hold down
the PROGRAM button for more than
2 seconds.
Checking the programmed tracks
• When the STOP( ) button is pressed
to stop program play, press the
PROGRAM button.
1
In the stop mode, press and hold down the PROGRAM button for more than 2 seconds.
2
Select the desired track with pressing the NUMERIC buttons on the remote control.
Example) When the track 5 and 12 are programmed.
• For 5 :
• For 12 :
• The playing time of over 99 minutes 59 seconds cannot be displayed.
3
Repeat the above step 2 until the desired tracks are programmed.
4
To start program play, press the PLAY( ) button or the CURSOR/ENTER button.
PLAYING TRACKS IN DESIRED
• Up to 25 tracks can be programmed to be played in any desired order.
Main unit
RC
or or
RC
RC
PROGRAM P00:00 00:00:00
RC
RC
RC
5
+10 2
PROGRAM P01:05 00:03:34
PROGRAM P02:12 00:05:47
Playing time of the programmed tracks
Programmed track number
Programmed order