Sony BDP-S1000ES Blu-ray Player User Manual


 
28
You can control the volume, input source,
and power switch of your Sony TV with the
supplied remote.
b
When you replace the batteries of the remote, the
code number may be reset to the default setting. Set
the appropriate code number again.
Available buttons
Depending on the connected unit, you may
not be able to control your TV with some or
all of the buttons (TV [/1, INPUT, or TV
VOL +/–).
To control other TVs with the remote
You can control the volume, input source,
and power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer’s code.
b
If you enter a new code number, the code number
previously entered will be erased.
1 While holding down TV [/1, enter the
TV’s manufacturer code using the
number buttons.
For instance, to enter “09,” press “0” then
“9.”
Code numbers of controllable TVs
If more than one code number is listed,
try entering them one at a time until you
find the one that works with your TV.
Controlling TVs with the
remote
Buttons Operations
TV [/1 Turns your TV on or off.
INPUT (input
select)
Switches your TV’s input
source between the TV
and other input sources.
TV VOL (TV
volume) +/–
Adjusts the volume of
your TV.
Number
buttons
TV [/1
INPUT
TV VOL +/–
Manufacturer Code number
Sony 01 (default)
Admiral 10, 18
Akai 04, 12
AOC 04
Bell & Howell 18
Broksonic 04, 12
CCE 08, 22
Craig 14
Croslex 08
Crown 14
Curtis Mathis 04, 07, 12, 14
Daewoo 04, 12, 22
Daytron 03
Emerson 03, 04, 05, 12, 14,
23
Fisher 11
Funai 23
General Electric 04, 06, 10, 12
LG/Goldstar 03, 04, 12, 17
Gradients 09
Hitachi 02, 03, 04
J.C.Penney 04, 10, 12, 17
JVC 09
KTV 03, 04, 12, 14
LXI (Sears) 04, 07, 08, 10, 11,
12
Magnavox 03, 04, 06, 08, 12,
21