Sony BDV-NF7220 Blu-ray Player User Manual


 
20
GB
BDV-NF7220
4-485-836-E1(1)
D:\NORM'S JOB\SONY HA\SO130046\BDV-
N9200_7200_5200_E3200\4485836E11_ZE (NF7220)\040GET.fm
masterpage: Left
Getting Started
When you make connection A
This connection can transmit both video and audio signals.
•Video signals from the HDMI (IN 1/2) jacks are output to the HDMI (OUT) jack only when
the “HDMI1” or “HDMI2” function is selected.
•To output an audio signal from the HDMI (IN 1/2) jacks to the HDMI (OUT) jack, you may
need to change the audio output setting. For details, see [Audio Output] in [Audio
Settings] (page 48).
•You can change the audio input of an equipment that is connected to the HDMI (IN 1) jack
to the TV (DIGITAL IN OPTICAL) jack. For details, see [HDMI1 Audio Input mode] in [HDMI
Settings] (page 50).
When you make connection B, C
Connect the system so that video signals from the system and other equipment are
output to the TV, and audio signals from the equipment are output to the system.
•If you make either connection above, set [Control for HDMI] in [HDMI Settings] of [System
Settings] to [Off] (page 50).
•You can enjoy equipment sound by selecting “TV” function for connection B or “AUDIO”
function for connection C.
A High quality
B
C
Standard quality
Note
Note
HDMI cable*
(not supplied)
*
High Speed HDMI cable
OPTICAL
DIGITAL OUT
L
R
AUDIO
OUTPUT
HDMI OUT
Optical digital cord
(not supplied)
Audio cable (not supplied)