52
GB
BDV-NF7220
4-485-836-E1(1)
D:\NORM'S JOB\SONY HA\SO130046\BDV-
N9200_7200_5200_E3200\4485836E11_ZE (NF7220)\090SET.fm
masterpage: Left
x [Network Connection Status]
Displays the current network
connection status.
x [Network Connection Diagnostics]
You can run the network diagnostic to
check if the network connection has
been made properly.
x [Connection Server Settings]
Sets whether or not to display the
connected DLNA server.
x [Auto Renderer Access Permission]
[On]: Allows automatic access from a
newly detected DLNA controller.
[Off]: Off.
x [Renderer Access Control]
Sets whether or not to accept
commands from DLNA controllers.
x [Registered Remote Devices]
Displays a list of your registered remote
devices.
x [Remote Start]
[On]: Allows turn on the system by a
device linked via network when the
system is in standby mode.
[Off]
: The system cannot be turned on
by a device linked via network.
[Easy Network
Settings]
Runs [Easy Network Settings] to make
the basic network settings. Follow the
on-screen instructions.
[Resetting]
x [Reset to Factory Default Settings]
You can reset the system settings to the
factory default by selecting the group of
settings. All the settings within the
group will be reset.
x [Initialise Personal Information]
You can erase your personal
information stored in the system.
If you dispose, transfer or resell this
system, please delete all Personal
Information for security purposes. Please
take the appropriate measures such as
logging out after using a network service.
Note