Filter
Top Products
Using the Remote Control (RM-Y806)
5
Using the Remote Control (RM-Y806)
Buttons that are highlighted below can also be used to operate your
TV and VCR after you’ve programmed the remote control. For
details, see “Programming the Remote Control” on page 6.
✍
The following describes the Sony RM-Y806 remote control. If Cablevision supplied you
with a different remote control, see the manual that came with that remote for details.
Button Description
MUTE
Mutes the sound. Press again or press
VOL
to restore the
sound.
VCR POWER
Turns the VCR on and off.
TV POWER
Turns the TV on and off.
CABLE POWER
Switches the Digital Network Receiver between active
and standby modes.
INPUT
Selects (toggles through) the video inputs.
VCR FUNCTION
Activates the remote control for use with a VCR.
TV FUNCTION
Activates the remote control for use with a TV.
CABLE FUNCTION
Activates the remote control for use with the Digital
Network Receiver.
VIEWER
Displays the Viewer screen (see the Cablevision user
guide for details).
m
Rewind video.
N
Play video.
M
Fast-forward video.
z
and
N
Record (press simultaneously).
x
Stop video.
X
Pause video.
FAV
Displays the Favorites screen (see the Cablevision user
guide for details).
0 – 9
Selects a channel number directly. For example, to select
channel 6, enter
006
. Or you can enter
6
and then
#
(the
ENTER button).
Selects the ”” indicated advertisement frame in the
displayed screen.
#
ENTER
button, used for confirming channel numbers (see
0-9
description above).
GUIDE
Displays the Guide screen (see the Cablevision user
guide for details).
MENU
Displays the Menu screen (see the Cablevision user
guide for details).
continued
CV.book Page 5 Thursday, November 30, 2000 2:13 PM