Filter
Top Products
Connecting the Digital Network Receiver
21
Home Entertainment System
Connecting a
Hi-Fi TV, Hi-Fi VCR,
and an Audio/Video
Receiver
See the illustration on the next page for details.
1
Connect the coaxial cable from the wall outlet (Cablevision cable
network signal) to the Digital Network Receiver’s
CABLE IN
jack.
2
Connect the Digital Network Receiver’s
LINE OUT 1 (TV) AUDIO /VIDEO
jacks to the A/V Receiver’s
AUDIO/VIDEO IN
jacks.
3
Connect the Digital Network Receiver’s
LINE OUT 2 (VCR) AUDIO /VIDEO
jacks to the VCR’s
AUDIO/VIDEO IN
jacks.
4
Connect the VCR’s
AUDIO/VIDEO OUT
jacks
to the A/V Receiver’s
AUDIO/VIDEO IN
jacks.
5
Connect the A/V receiver’s
MONITOR OUT
jack to the TV’s
VIDEO IN
jack.
6
Connect one end of the AC power cord to the Digital Network
Receiver’s AC IN jack, then connect the plug end to an AC outlet.
✍
If your components have S VIDEO jacks: For best picture quality, use an S VIDEO
connection instead of the yellow video cable on your combined A/V cable. Using an S
VIDEO cable, connect the Digital Network Receiver’s VIDEO OUT jack to the TV’s S
VIDEO IN jack. S VIDEO does not provide audio, so audio cables must still be connected
to provide sound.
If your A/V receiver has digital audio in jacks, you can experience superior audio by
connecting the Digital Network Receiver’s digital audio out jack (COAXIAL or OPTICAL)
to your A/V receiver’s digital audio in jacks.
CV.book Page 21 Thursday, November 30, 2000 2:13 PM