Filter
Top Products
Connecting the Digital Network Receiver
18
TV with A/V Connectors
1
Connect the coaxial cable from the wall outlet (Cablevision cable
network signal) to the Digital Network Receiver’s
CABLE IN
jack.
2
Connect the Digital Network Receiver’s
LINE OUT 1 (TV) AUDIO /VIDEO
jacks to the TV’s
AUDIO/VIDEO IN
jacks.
3
Connect one end of the AC power cord to the Digital Network
Receiver’s
AC IN
jack, then connect the plug end to an AC outlet.
From wall
outlet
TV
A/V cable
AC cord
1
2
3
✍
If your TV has an S VIDEO jack: For best picture quality, use an S VIDEO connection
instead of the yellow video cable on your combined A/V cable. Using an S VIDEO cable,
connect the Digital Network Receiver’s S VIDEO OUT jack to the TV’s S VIDEO IN jack. S
VIDEO does not provide audio, so audio cables must still be connected to provide
sound.
CV.book Page 18 Thursday, November 30, 2000 2:13 PM