Filter
Top Products
Connecting the Digital Network Receiver
16
TV with RF Connector Only
1
Connect the coaxial cable from the wall outlet (Cablevision cable
network signal) to the Digital Network Receiver’s
CABLE IN
jack.
2
Connect the Digital Network Receiver’s
TO TV/VCR
jack to the TV’s
VHF/UHF IN (
or
RF IN
) jack.
3
Connect one end of the AC power cord to the Digital Network
Receiver’s
AC IN
jack, then connect the plug end to an AC outlet.
4
Tune to channel 3 on your TV to see cable channels.
TV
AC cord
Coaxial cable
From wall
outlet
132
CV.book Page 16 Thursday, November 30, 2000 2:13 PM