Filter
Top Products
22
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use . If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use .
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
z Hint
To realize better surround sound effects, make sure
that your listening position is in between your
speakers.
Note
Super Audio CD audio signals are not output from
the DIGITAL OUT (COAXIAL or OPTICAL)/
HDMI OUT jack.
B
B-1
B-2
5.1CH OUTPUT
FRONT REAR WOOFER
CENTER
AUDIO OUTDIGITAL OUT
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
COMPONENT VIDEO OUT
Y
VIDEO
OUT
1
2
S VIDEO
OUT
1
2
CONTROL S
IN
HDMI OUT
AUDIO OUT
L
R
DIGITAL OUT
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
L
R
1
2
L
R
P
B/CB PR/CR
2
1
CD/DVD player
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red)
(white)
Coaxial digital cord
(not supplied)
Stereo audio cord
(not supplied)
to audio input
to coaxial or optical
digital input
to AUDIO OUT L/R
1 or 2
to DIGITAL OUT
(COAXIAL or OPTICAL)
l: Signal flow
Optical digital cord
(not supplied)
Remove plug cap
before connecting.
or