54
3 Press C/c to adjust the brightness
level of the area that you selected.
C decreases the level (darkens the area),
and c increases the level (lightens the
area). The level can be adjusted between
16 and 235. The level for the dark areas
can never be greater than the light areas.
4 Repeat steps 2 and 3 to adjust the
brightness level of other areas that
you select.
Try to keep the line that connects the
brightness level of each area as smooth
and straight as possible, as shown below.
To prevent the image from appearing
overly altered, do not give the line any
sharp changes. Gradually make the
adjustments while viewing the image on
your TV screen.
Press O RETURN to stop making
adjustments to the image.
5 Press ENTER.
The “GAMMAt” adjustment bar
appears and the adjusted gamma values
are stored in memory.
To reset only the gamma value to the
default setting
Select “RESET” in the “GAMMA”
adjustment display by pressing X/x, and
press ENTER.
z Hint
You can move the gamma adjustment display
horizontally by pressing ./>.
Note
“GAMMA” is not usable when signals are output
from the HDMI jack.
OFF
1: ENGLISH
2: FRENCH
3: SPANISH
1: ENGLISH
32
64
120
128
160
192
224
RESET
0%
50
100
Gamma value and
the position of the
bar change in
accordance with
your adjustment
LightenDarken
OFF
1: ENGLISH
2: FRENCH
3: SPANISH
1: ENGLISH
RESET
0%
50
100
OFF
1: ENGLISH
2: FRENCH
3: SPANISH
1: ENGLISH
RESET
0%
50
100
58
89
94
128
160
192
224
35
64
105
128
150
159
174
How to lighten the
dark areas of an
image
How to darken the
light areas of an
image