Filter
Top Products
23
Hookups
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use . If your amplifier
(receiver) has a digital input jack, use .
z Hint
For correct speaker location, refer to the operating
instructions of the amplifier (receiver).
Notes
• When connecting 6 speakers, replace the
monaural rear speaker with a center speaker, 2
rear speakers and a subwoofer.
• Super Audio CD audio signals are not output from
the DIGITAL OUT (COAXIAL or OPTICAL)/
HDMI OUT jack.
C
C-1
C-2
5.1CH OUTPUT
FRONT REAR WOOFER
CENTER
AUDIO OUTDIGITAL OUT
L
R
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
COMPONENT VIDEO OUT
YPB/CB PR/CR
VIDEO
OUT
1
2
S VIDEO
OUT
1
2
CONTROL S
IN
HDMI OUT
AUDIO OUT
L
R
DIGITAL OUT
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
L
R
1
2
2
1
CD/DVD player
Front (R)Front (L)
Rear (R)
Subwoofer
l: Signal flow
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Center
Rear (mono)
Stereo audio cord
(not supplied)
[Speakers]
Coaxial digital cord
(not supplied)
(red)
(white)
to coaxial or optical
digital input
[Speakers]
to audio input
(white)
(red)
to AUDIO OUT L/R
1 or 2
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove plug cap
before connecting.
or
c continued